Desco 07599 foot grounder, heel, 1meg, ul listed

• Heel Grounder
  Converts non-ESD footwear to footwear that will provide a path-to-ground and will not generate a charge.
• Tab to Cup Resistance: 1 x 10⁶ to < 1 x 10⁷ ohms at 100 volts
  Meets the ANSI/ESD S20.20 required limit tested per ESD SP9.2 & ESD TR53
• High Visibility Neon Lime Green Fastening System
  Adjustable sizing material expands to fit most shoe sizes comfortably.
• Non-Marring Interior
  Will not leave marks on operator’s shoes.
• 18 Inch Conductive 8-Strand Nylon Polyester Grounding Tab
  Additional conductive material provides reliable connection with operator’s sweat-layer.
• UL Listed
  Independently reviewed for adequacy of the product’s design.
• Made In the United States of America
  This item is made in Rochester, NH and stocked in Canton, MA

Note: Packed 20 each. Orders that are not for a multiple of 20 will be shipped loose.

Suitable for ESD footwear component in Flooring - Footwear System personnel grounding method (<3.5 x 10E7 ohms per ESD STM 97.1). Suitable for ESD footwear component in flooring - Footwear System personnel grounding method (<100 volts per ESD STM 97.2).

ESD protective footwear is designed to reduce body charge levels by supplying a conductive path from the body to the floor material. Heel and Toe grounders should be worn on both feet to insure effective use. [ESD Handbook ESD TR20.20 section 5.3.3.3.4 Proper Usage]