The DL-350W is designed to take individual bare PCBs (up to 500 mm long x 460 mm wide) from the bottom of a stack (up to 200 mm high) and to feed them into the production line from an integral edge-belt-type conveyor
The DL-350W accommodates boards from 0.4 mm to 2.5 mm thick and includes automatic stack height sensing and alarm
Pass-through mode for double-sided assembly
A pass-through function allows other equipment, such as a magazine loader, to be installed at the DL-350W input for double-sided board assembly. When a line is set up this way, the DL-350W would be used to send bare boards through the line for first-side assembly. When the assembled boards are returned to the line for second-side assembly, DL-350W would act as a basic pass-through/transport conveyor
