Fluke 1AC-II Volt Alert

Fluke 1AC-II VoltAlert

The pocket-sized voltage detector

The next generation VoltAlert AC non-contact voltage testers from Fluke are easy to use just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know theres voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

Voltbeat technology and continuous self-test so you always know its working
Upon detection, tip glows and beeper sounds
CAT IV 1000 V for added protection
Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
20 V to 90 V AC control circuit model also available
Two-year warranty

SPECIFICATIONS:
Operating principle: Senses the steady state electrostatic ?eld produced by ac voltage through insulation without requiring contact to the bare conductor. A red glowat the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
Voltage sensing ranges: Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model
Detector tip style: Blade or round, depending on model
Light source: One high intensity red LED
Agency Approvals: c CSA us, CE, C-Tick
Safety Rating: 1000 V, CAT IV
IP Rating: 40
Operating Temperature: -10 °C to 50 °C
Operating humidity ranges:
0 % to 95 % (0 °C to 30 °C)
0 % to 75 % (30 °C to 40 °C)
0 % to 45 % (40 °C to 55 °C)
Operating Altitude: 3000 meters
Batteries: 2 AAA alkaline batteries included