Hakko FM204 Desolder Station

Does not come with tips (please see below for compatible tips).

Hakko FM-204 Desolder Station Features & Benefits

- Vacuum pump type desoldering tool
- Excellent thermal recovery
  The integrated nozzle containing both heating element and sensor provides higher thermal recovery than conventional tips. 
- Soldering work is possible by replacing the handpiece
  Connectible handpieces:
    - Desoldering handpiece (Hakko FM-2024)
    - Soldering Iron (Hakko FM-2027)
    - N2 Soldering Iron (Hakko FM-2026) 
- Easy maintenance
  Filter pipe replacement:
    - Disposable paper filter pipe
    - Easy to dispose of paper and solder separately
  Nozzle replacement
    - Safe to replae with nozzle remover
    - Replacable even before the end of nozzle has cooled down 
- Power safe function
  Sleep function:
  When the handpiece is placed on the Iron Holder (FH200-01/FH200-02), the sleep function operates and decreases the unused tip temperature up to approximately 200øC , preventing the tip from being oxidized.  In addition, this function can relieve the loads applied to the tip due to the high-temperature settings required for lead-free soldering
* The connecting cable enables the iron holder and temperature controller to be activated
- Auto power shut-off function:
  By connecting the iron holder (HAKKO FH-200) to the connecting cable, the auto power shut-off function is activated in the same manner as the sleep function. Selectable buzzer and alert ON/OFF setting Buzzer and alert sound generation upon error and when reaching the setting temperature can be   selected. ON/OFF-settable buzzer sound


***The Hakko FM204 Soldering Station does not come with soldering tips***

The Hakko FM204 Soldering Station is compatible with the N1 series of solder tips. Click here to view the range of Hakko N1 soldering tips.

Hakko FM-204 Desolder Station Includes

• Main unit (HAKKO FM-204 station)
• Iron holder (No. FH200-05; with tip cleaner)
• Ceramic paper filter (10pcs.) (for replacement)
• Cleaning drill (for heating element)
• Filter pipe assemblies (2pcs.) (originally equipped to the unit and one for spare*5)
• Control card
• Desoldering tool (Model FM-2024)
• Connecting cable
• Nozzle remover
• Handle (for gun configuration)
• Power cord
• Instruction manual
• Tip tray

Hakko FM-204 Desolder Station Specifications

• Power consumption: 120W
• Temperature range: FM-2024 : 350 to 450 Degrees Celcius. FM-2026/2027: 200 to 450 Degrees Celcius
• Temperature stability: +/-5 Degrees Celcius at idle temperature

Station

• Output voltage: AC 24V
• Vacuum generator: Vacuum pump, double cylinder type
• Vacuum pressure: Max. 80kPa (600mmHg)
• Suction flow: 15L/min.
• Dimensions: 160(W)x120(H)x225(D)mm
• Weight: 3.7kg

Desoldering Tool  

• Power consumption: 70W (24V)
• Nozzle to ground resistance: <2O
• Nozzle to ground potential: <2mV
• Heating element: Composite heater
• Cord length: 1.2m
• Total length: 180mm (with F1.0mm nozzle)
• Weight: 65g (with F1.0mm nozzle)