Hakko FR702-91 SMD Hot Air Rework Station

Hakko FR702-91 SMD Hot Air Rework Station

• Powerful rework stations that contain every function needed for rework
• Safer and more secure rework operation
• With upgraded all the applications
• 4-in-1 unit for space saving

Compatible with N2 system by purchasing N2 iron (FX-8802) as an optional accessary
4 Port Rework Station with 140 W desoldering gun, M-type soldering iron and 670W hot air

It handles various soldering, desoldering and reworking by choosing proper handpieces from a selection of 7 types
- Other than the standard handpieces of 140 W desoldering gun, M-type soldering iron and high power & large volume hot air, there are 4 more applications. Consumed tip nozzle and heating element can be replaced individually, and running cost is much lower than the composite type

High-power Desoldering gun HAKKO FR-4103
- Increasing the power to 140 W from 50 W of our previous models (HAKKO 474·475), it can make it easy to desolder on multi-layer PWB which was never an easy job, and it can also shorten the process time
- A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works
-- Long type nozzles for narrow space
-- Oval shape nozzles for flat terminals
-- SS type nozzles for micro land-patterns

Soldering iron HAKKO FX-8801/FX-8805
- Thermal conductivity has been increased by reviewing external configuration and internal structure of 900 tip series
- Now T18 and T19 tip series are selectable depend on work environment

Hot air handpiece
- 670 W high power and large volume hot air improves work efficiency
- New type of nozzles for improvement of temperature characteristics
-- The new nozzle improves work efficiency with uniform heating by hot air convection inside the nozzle which is created due to vents on the nozzle top. (only with BGA nozzles)
- Vacuum pickup function
-- The vacuum pick up function is to pick up a component with a suction pad and vacuum. It will pick a component only after the hot air melts solder joints. This can avoid an error to peel off the land by removing a component with excessive force
- Pickup indicator lets you know the pickup timing at a glance!
-- By pre-setting pickup function, a component can be picked up automatically when solder is melted. Then, the indication comes up and the moment of picking up will be visible
-- Even a component and solder joints cannot be seen as covered by a nozzle, easy and safe picking up is possible

N2 soldering iron HAKKO FX-8802
- The N2 gas runs into the nozzle assembly and covers over the soldering tip. It prevents the soldering tip and the heater from being readily oxidized and performs great role as a preheating
- Two effects of N2 system, preventing oxidation or preheating effect, can improve soldering defects such as bridging, protrusion icicle, insufficient solder filling in PTH, etc
- T18 tips series are compatible with this application

One-hand Manual-solder-feed iron HAKKO FX-8803
- Solder and feed with one hand
- Feed a set amount of solder with one hand
- Manual feed system is perfect for cellular manufacturing
- Soldering work can be conducted at the pace of the operator
- T18 tips series are compatible with this application

SMD Hot Tweezer HAKKO FX-8804
- Direct heating—less influence upon surrounding components on crowded boards
- Easily removes SMD chips and flat packages up to 25mm
- The collet allows easy replacement and alignment of the tips

The Hakko FR702-91 SMD Hot Air Rework Station is compatible with the Hakko T18 series soldering tips. Click here to view the range of Hakko T18 soldering tips.