Hakko FX-838 Heavy Duty Soldering StationFeatures & Benefits:
High Power 150W Soldering Station enjoys the various applications from large to fine components.
- Great thermal recovery improves the soldering environment
- It allows soldering at lower set temperatures.
- It can shorten the soldering working time, which minimize concern about the influence of heat on components and tip life.
- It is suitable not only for high-power required working condition such as soldering multilayer boards or shield cases but for microsoldering.
- Operate at Maximum Temperature of 500 Degrees.
- It enables soldering power-supply boards easily because high power 150W hand piece can provide great thermal recovery.
- High Power but Safety design of low voltage.
- This unit has not only high power but also low output voltage (27V) , which is lower than the world safety output voltage of 30V.
- Easy to replace tips.
- Cartridge style Integrated heater makes thermal conductivity improve.
- Available 20 different shape as replacement, some of which are suitable for fine components.
- Temperature preset mode saves time and effort.
- It allows you to input three frequently-used temperatures in advance and recall them with one push of a button.
- It saves the troublesome setting condition, tailored to the tip-shape, component and work.
Hakko FX-838 Heavy Duty Soldering Station Includes- Soldering station (HAKKO FX-838)
- Soldering iron (HAKKO FX-8301)
- Control card
- Power cord
- Iron holder (With cleaning sponge and 599B)
- Connecting cable
- Heat resistant pad
- Instruction Manual
N.B. A soldering tip is not included with this product. The tips (T20 series) of desired shape can be purchased separately.
Hakko FX-838 Heavy Duty Soldering Station Specifications
- Power consumption: 158W
- Temperature range: 200 to 500ºC
- Temperature stability: ±5ºC at idle temperature
Station
- Output voltage: AC 27V
- Dimensions: 110(W) × 110(H) × 205(D) mm
Weight: 3.2kg
Soldering Iron
- Power consumption: 150W (27V)
- Tip to ground resistance: <2O
- Tip to ground potential: <2mV
Heating element Ceramic heater
- Cord length: 1.2m
- Total length: 175mm (with 2.4D tip)
- Weight: 31g (with 2.4D tip)
* Total length and weight (w/o cord)
The Hakko FX-838 High Power Solder Station is compatible with the T20 series solder tips.
Click here to view the range of Hakko T20 solder tips.