Owon ODP6033 Programmable DC Power Supply 0-60V 0-3A

OWON ODP3033 3-CH Output With 2-CH 0-60V/3A And 0-6V/3A Programmable DC Power Supply

?• Three independent controllable channels
?• Output resolution : 1mV / 1mA
?• Low ripples / low noise
?• Up to 100 group timers
?• Multi- working mode : individual, parallel, and series
?• Over-voltage / Over-current protection
?• Data-logging function: could record the output voltage, and current; and display recorded data in chart
?• Auto-cooling system
?• 4 inch high resolution (480 × 320 pixels) LCD
?• Multi- CI: USB, RS232, and LAN
?• SCPI, and LabVIEW supported

Triple Output: 3 independent channel

function as 3 power supply unit;
via parallel / series connection, the power output range of 1 channel could be wider.

Timing Output

Support 100 groups timing output settings, the power output curve could be adjusted via PC,
or device itself. And applicable to artificial simulated power output variation.

CV / CC Auto-switch

Along with load varies, the power output auto-switches between CV / CC.
 
Give an operation example, in the circumstance you set a voltage of 10V at a current of 1A,
when actual current not larger than 11A, the power supply unit works under CV status,
the power output alters with load accordingly; whereas when actual current larger than 1A,
the power supply unit will limit the current automatically, and switch into CC mode,
then the power output alters with load accordingly.

Low Ripples / Low Noise

OWON ODP features super- low ripples, and super- low noise,
which causes almost no influences to circuit tes