JBC RMSE-2QE Complete Rework Station
Specifications:
- Temperature (DDE): 90 to 450 Degrees Celsius
- Temperature (JTSE): 150 to 450 Degrees Celsius
- Air Flow (JTSE): 5 to 50 SLPM
- Operation modes (JTSE): Heating / Profiles / Cooling
- Vacuum (MSE): 75% / 570 mmHg / 22.4 inHg
- Flow rate (MSE): 9 SLPM
- Vacuum (JTSE): 30% / 228 mmHg / 9 inHg
CONNECTIVITY
- USB-B (rear): Software PC / Traceability
- USB-A (front): Firmware update. Soldering Graphics / Profiles management.
- Robot: RS-232 remote control or Smart Fume Extractor connection
- Type K thermocouple (JTSE): Can be used both for Control and Protection purposes.
- Pedal: Optional tool control
- Equipotential bonding: Optional connection to EPA
ESD/EOS
ESD Safe
- Tip to ground resistance: <2 ohms
- Tip to ground voltage: <2 mV RMS
POWER SUPPLY
- Peak Power (DDE): 150 W per tool – 23.5 V
- Peak Power (JTSE): 700W
- Ambient operating temp.: 10 to 50 Degrees Celsius
DIMENSIONS AND WEIGHT
- Dimensions/Net weight: See individual modules
- Package: 370 x 480 x 380 mm / 16.50 kg
