• Single Station Continuous Monitor for Operator, ESD Worksurface, and Tool Ground
  Continuously monitors the charge generation of one operator, the ground integrity for one mat and one metal tool or fixture; eliminating the need for periodic testing and record keeping of wrist straps.
• Dual-Channel Voltage Monitoring Technology (Alarms at >±1 VDC)
  One lead of the dual-wire wrist strap provides a path-to-ground for the operator and the other lead continuously monitors for any voltage induced onto the operator greater than ±3 VDC. Voltage on the operator can be caused by strong AC fields in the work area or by other charge generators such as rolling a non-ESD safe chair.
• Monitored Supervisor Jack
  Use to monitor a supervisor or second operator at the workstation.
• Optional Tool Ground
  Use to monitor the ground integrity of a conductive tool or fixture less than 3 Ohms.
• Use with Dual-Wire Wrist Straps
• NIST Calibrated with Certificate
  Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of Desco products, see Calibration
• Made in the United States of America
  Made and stocked in Chino, CA.

Desco’s Body Voltage Monitor is a single station continuous monitor for one operator, one ESD worksurface and one tool ground. A second monitored jack is for use by a supervisor or second operator at the workstation.

The Body Voltage Monitor uses Dual-Channel Voltage Monitoring Technology for true continuous monitoring (versus pulsed or intermittent). The Dual-Channel Voltage Monitoring Technology uses one lead of the dual wire wrist strap to provide a path-to-ground for the operator while the other lead continuously monitors for voltage induced onto the operator greater than ±3 VDC. Voltage on the operator can be caused by strong AC fields in the work area or by other charge generators such as rolling a non-ESD safe chair.

The Body Voltage Monitor has a second monitored jack for a supervisor or a second operator if needed at the workstation. An optional tool ground can be used to monitor the ground integrity of a conductive tool or fixture less than 3 Ohms.

Each Body Voltage Monitor is calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology (NIST) and includes a NIST certificate.